P1

Preamplifier

P1 is a top of the range preamplifier. An audiophile model capable of sublimating all your music while maintaining an optimal signal-to-noise ratio and a distortion reduced to the strict minimum. The product is not fixed in time, its optional input cards and its modularity allow it to easily follow the market's evolutions.

The MPH II and MDAC I modules are included in the P1 F version.

Equipped with line inputs in its original configuration, it can in fact be completed with optional slot cards: one for the RIAA MM/MC Phono stages, as well as another module offering three digital inputs with a resolution of up to 32 bit sampled at 384 kHz.

This modularity, both for the analog and digital parts, is supported by internal software that can be "upgraded" by the user by means of an easily accessible USB socket. Elipson P1 is therefore a device of the present looking to the future.

Elegant and sober at the same time, the P1 is totally transparent thanks to the care given to these circuits allowing extremely low background noise and distortion.

Complete with its multiple possibilities, its interface via the front screen offers you perfect comfort of use, complemented by its personalized and elegant remote control.

The result is a reproduction of the tiniest details, an airy spatialization and perfect respect for silences.

Our range is entirely made in France in our Burgundy factory.

• LINE INPUT
• Maximum output voltage: 21 dBu (18.8 dBV) @ THD=1%.
• Crosstalk: < -100 dB up to 10 kHz
• Input impedance (balanced / unbalanced): 500 kΩ / 1 MΩ
• Signal to noise ratio: 102 dB (A) @ 1 V; Dynamic 120 dB
• Total harmonic distortion: < 0.001% over the entire audio band between -16 and +16 dBu
• Bandwidth (Line): 2 Hz - 120 kHz @ - 3 dB
• Output gain (balanced / unbalanced): 18 dB / 12 dB
• MISCELLANEOUS
• Total number of inputs: 3
• Line inputs: 2x Line RCA + 1x Sym XLR
• Outputs: 1x RCA stereo (Asym) + 1x XLR stereo (Sym) + sub + trigger out
• Stereo / Mono mode: Yes on front panel
• Balance: Yes ± 6 dB
• HEADPHONE OUTPUT
• Output power: 150 mW / 32 W
• Harmonic Distortion: < 0,001 %
• Signal to Noise Ratio: > 100 dB @ 10 mW / 32 Ω
• Bandwidth: 2 Hz - 120 kHz
• Compatible impedances: 16 to 600 Ω
• Dimensions (WxHxD): 430 x 95 x 302 (315 with connectors) mm